Blue Mountain Seamless Gutters
CALL US NOW: 610-262-0919

How To Paint Vinyl Siding

How to Paint Vinyl Siding

Do you think that it is time for your home’s vinyl siding to be replaced? But, are you still looking for an alternative that is more cost-effective? Is it even possible to paint vinyl siding? There is an alternative and that is by means of painting vinyl siding! The answer is yes. This leads to the next question. How to paint vinyl siding.
In fact, there are now paints that are specifically designed for vinyl siding application. This innovation makes it possible for homeowners and business owners to settle on a more budget-friendly option than replacing the material. Unfortunately, not all people are aware that this type of siding can be painted.
In your quest on how to paint vinyl siding, you only need to have the right kind of paint. The next step, you must choose the most appealing and suited colors that help improve the siding’s appearance. In the end, you will even succeed in giving your home a new look without spending as much.
It’s Now Possible to Paint Vinyl Siding. But Why Would You Want to do so?

how to paint vinyl sidingPainting vinyl siding is beneficial in many ways. It improves the material’s durability. In terms of the labor needed to complete the job, it can be said that it is less labor intensive. This is the case when compared to painting masonry, hardboard and wood surfaces. This siding’s surface is even easier to clean because it does not keep the moisture. It also dries up quickly.
Now, how can you take advantage of these? There is only one thing that needs to be done. This is by means of considering and following the steps on how to paint vinyl siding. Doing so ensures you of getting the job done the right way. But before proceeding to the process, you need to know one thing first.

How To Paint Vinyl Siding -Be Weather Wise

Painting vinyl siding requires application during ideal conditions. So, gather some information about the weather forecast in the area first. The best conditions to start a vinyl siding painting project are during the days with mild temperature; an overcast sky and low humidity. Avoid applying paint on the siding if it is in direct afternoon sunlight. Doing so only makes it prone to flaking and cracking after a while.

How To Paint Vinyl Siding – The Process

Cleaning
Before starting the painting project, the vinyl siding’s surface must be cleaned first. Chalk, dirt, mildew must be removed for optimum adhesion. Surface cleaning can be done by power washing or hand scrubbing. Use the power wash with caution if you choose to perform this cleaning method.
Priming
Priming is not required most of the time. At most, only those porous vinyl siding or pitted area requires to be primed. But if it is necessary, ensure to use only the best and most trusted primer products.

How To Paint Vinyl Siding – Picking the Paint to Use

One thing you need to remember is not to reach for just any can of paint. It is your goal for the paint not only to look good on the vinyl siding, but for it to also last. That can be most assured by selecting the best paint products that contain urethane resins and acrylic.
These ingredients accommodate the contraction and expansion of vinyl. But, make sure that the coating would stick. Use paint color that is lighter or has the same shade as the current one used. With most paint manufactures this is the case. You can use Sherwin Williams paint with confidence. Maintain and extend the longevity of your paint job’s life by power washing the vinyl siding during the spring season.
Looking for a professional who knows how to paint vinyl siding. You can find a reliable service provider in Holencik Exteriors. Feel free to call at 610-262-0919 or visit www.holencikpainting.com to know more!



Can You Paint Vinyl Siding

Can You Paint Vinyl Siding

It was during the 1950s when vinyl siding was launched in the market. It was introduced as a replacement for another type of siding, the aluminum siding. Back then, it was known as a less expensive alternative that does not need to be repainted due to rotting or peeling.
But, that was something too good to be true. Then, the drawbacks associated with it began materializing. These drawbacks include the fading of color over time due to sun exposure. This left people wondering if there was any way they can remedy the issue without getting a new replacement. The question can you paint vinyl siding was brought up.
Unfortunately, painting vinyl siding was not a good option back then. This is due to the reason that it can cause some serious effects like warping. Years passed, and it remained as the case. But, the advancement in technology still brought up the question, can you paint vinyl siding? About 10 or 20 years ago, the answer would be a big no-no. But now, time has changed.
Advances in Paint Technology has Taken Place Making it Completely Possible to Paint Vinyl Siding
Painting vinyl siding has not just become possible. Highly-rated painters now consider this as a cost-effective alternative to replacing the siding. This type of siding is also possible to be painted, as long as the process is done correctly. The question is no longer can you paint vinyl siding. It is what steps do you need to take to ensure a successful vinyl painting job?

can you paint vinyl sidingVinyl Siding Surface Preparation – A Vital Aspect to a Successful Painting Job
There are various reasons why people decide to paint their home’s sidings. Although it is a siding material known for longevity, one that can last for 50 years, it still can fade and get dirty overtime. Yes, the siding can be cleaned up completely.
But, painting is still recognized as the perfect means of bringing it back to its good and new appearance. However, before painting is done, the siding needs to be cleaned first. In this case, the process fully requires the use of a power washer combined with house cleaning agent containing mildewcide.
It must be remembered that the preparation is essential to be performed for the success of the painting job.A clean surface is a must before the painting job is started. The preparation also includes the application of adhesive primer and high-quality acrylic paint.
Once the application of the adhesive primer is done, adding 2 coats of 100% acrylic paint is recommended. It is also best to apply the paint using a spray gun. Using acrylic paint is a must to ensure that it bonds over with the vinyl surface. It is also a must to use acrylic paint designed with vinyl-safe technology for better results. Using thick paint is not advised because it only flakes once applied on vinyl surface.
Can you paint vinyl siding is not the only question. Choosing the brand of paint is also an important aspect of the preparation. Not every brand of paint can be used on dark colors, like dark blue and black. This is due to the reason that it only bubbles overtime due to continued sun exposure.
The longevity and the right kind of paint are two important factors that must be considered when selecting the paint. Since vinyl is considered as an elastic material, the paint to be used must also be capable of expanding and contracting. Hence, it is best to choose paints that are made from urethane and mixed with acrylic resin. When the question, Can you paint vinyl siding,  arose, the answer was no. Today the answer is yes, you can paint vinyl siding.
Need professionals to do the painting job for you? Contact Holencik Exteriors at 610-262-0919! They can do commercial and residential painting services!



Fix Leaky Gutters

How to Fix Leaky Gutters

Gutters are used to direct rainwater to the appropriate drainage area to avoid any damage to the house or drainage and flooding problems. However, they end up collecting all other debris that ends up falling from the roof including leaves and branches. Most homeowners tend to overlook the maintenance of gutters and over time they may develop leaks at different spots. The accumulation of branches and leaves and also snow in colder climates, is bound to contribute to leaky gutters as their structure becomes weaker over time. For those who like simple do-it-yourself projects to keep their house in the best condition. Below we will look at some useful tips on how to fix leaky gutters.

fix leaky gutters

Before delving into the different ways of how to fix leaky gutters, it is essential to first note that gutters exist in two different variants. There are plastic and metal gutters available today. The fact that they are made of different materials means that they require different repair methods and equipment. Homeowners should begin by inspecting their home’s gutters to find out exactly what they are made of to determine what method to follow.

Fix Leaky Gutters – Metal

In most cases, metal gutters are the norm especially for older structures. The simplest way on how to fix leaky gutters that are made of metal is to scrape the joint and clear any debris and then dry it. Once dry, use a caulking gun to inject roofing and gutter sealant. If the leak persists then, it may require more work to repair your leaky gutter as described below.

Where the leaky gutter is not repaired by a simple application of sealant, it will be necessary to dismantle the entire gutter joint clean off the old and dried up putty and then apply a new sealant. Dismantling gutters may be problematic considering that the spike and ferrules used to hang the gutters may not pull out easily without damaging the gutters. It is then going to be necessary to replace the gutters instead of repairing them.

Fix Leaky Gutters – Plastic

Leaky gutters made of plastic, on the other hand, require less work as compared to metal gutters. Plastic gutters mainly leak around unions or joints that connect to the gutters to lead water downwards. In this case the most common cause of such leaks is the accumulation of dirt that forces the gaskets sealing the union to give way.

To fix leaky gutters made of pvc, press the pipe inwards to release the clips holding the pipe leading water down to the union. Once it releases you can check to see whether cleaning the accumulated dirt will be enough to fix the leak or installation of a new gasket is required. There are also PVC gutters that you can clean the gutter joints, then dry the pvc leaky gutter joint. You fix leaky gutter joints by applying a sealant recommended for pvc gutters. Regular maintenance will prevent leaky gutters.



Frozen Downspouts

This week’s number one problem has been frozen downspouts. Weather conditions have been perfect for freezing downspouts. Once the route down is frozen, the gutters will drip over and form those pretty icicles you’ve been seeing. I have been seeing the icicles, and frozen downspouts, all over town.

What can you do about this?

Prevention:  Downspouts freeze quickly if the water flow is stopped somewhere along the way.

frozen downspouts

 

In the recent storm, the heavy wet snow was enough to block water flow at the bottom, if the ends weren’t shoveled clear.  Because of the thawing and refreezing this week, downspouts also froze up at the elbows. Prevention involves clearing the ends of the downspouts and also keeping an eye on the elbow joints.

Downspouts collected ice inside, where the downspouts were dented or bent. Long-term prevention involves checking for bends and dings in the downspouts before winter sets in.

 Action: On line advice about frozen downspouts varies. Some say just leave it alone. Others recommend taking ice-melt to the gutters (see below.) A few say heat the gutters to clear them. One recommends whacking the gutter (from an upstairs window) with a baseball bat. Yet another recommends running electrical heat tape to prevent melting.

 What to look for to prevent a big problem?

The main reason that you don’t want your gutters icing up is two-fold. The worst thing that can happen is for the melting ice to find its way into your house.  The second worst thing that can happen is that the ice in the backed-up gutter gets heavy enough to tear the gutter off the house.

Ice Dam

Prevention: To prevent water in your house, your roof should be installed with a sheet of rubber under it. This way, if water collects on the edge of the roof, it won’t find its way through the waterproofing. The second prevention measure is to keep your roof cold. This means insulating and ventilating your roof surface. (This is also good for lowering your heating bills.) A warm roof allows snow to melt at the bottom edge, then refreeze overnight. Then, the subsequent melting the next day increases the build-up of  ice that will melt the next day, and so on. The more melting water, the more weight and pressure; these are conditions that favor water finding its easiest route down is through the wood behind your gutters. The third preventative measure is to make sure your gutters are draining well before the winter sets in. Most gutters collect leaves and debris that can impede to flow enough to allow freezing, even if the downspouts are clear. Clear and check the flow in your gutters sometime in the fall, after the leaves have fallen and before the cold sets in.

Roof Heat Tape

Action: If you see awesome quantities of ice collecting in your gutters and your downspouts are frozen, you may want to take evasive action. The tried and true method is to fill a stocking with ice melt and put it in the gutter. If this is a chronic problem that happens every year, using an ice rake to clear the snow near the bottom of the roof may be an option (depending on how high your roof is.)

The last-ditch and most expensive and inefficient method is to install heat tape to melt the snow and prevent the refreezing.

Frozen Downspouts

Frozen Downspouts was written by :



Remove Pine Needles From Roofs

Remove Pine Needles From Roofs

You ask “do I need to remove pine needles from roofs”? The answer is yes. You do need to remove pine needles from roofs. They retain moisture which will prematurely age your roof. Below is the recommendations from PABCO®Roofing Products on how to maintain your roof.

Remove Pine Needles From Roofs

PABCO®Roofing Products recommends the following maintenance practices for our asphalt shingles. There may be additional practices for other components of the full roofing system. PABCO® is only addressing the maintenance practices for our shingles.
• Avoid unnecessary foot traffic. The surface granules provide the appearance of the roof, but also cover and protect the core asphalt from harmful ultraviolet light. Excessive scuffing will shorten the useful life of the roof. (Newly installed asphalt shingles commonly carry some extra granules riding on the surface of the shingle.
These normally come off of the roof in a short period of time by the actions of rain and/or wind. After this initial release of granules, it is part of the normal weathering process for additional granules to be released over the life of the shingles.)
• Never allow water from a downspout to discharge directly onto a roof below. Connect an upper story downspout to a lower level gutter.
• Moss and algae need moisture to grow. To reduce the time moisture is available on the roof, do not allow the accumulation of roof debris, such as leaves or pine needles. Debris should be removed in a safe manner by a leaf blower or similar, non-abrasive method. The air flow should be directed down the slope to avoid driving debris under the edges of the shingles. Keep the gutters clear to promote proper water drainage.
• Periodic roof cleaning may be needed to keep the roof free of moss and algae growth. If keeping debris off the roof does not prevent moss and algae growth, kill the growth by applying a 50:50 mix of liquid chlorine bleach and water. Allow the solution to dwell on the surface (15 to 20 minutes) and then rinse thoroughly with
low pressure water. Extended dwell times may be necessary to kill the moss, however avoid letting the solution dry completely as this may prevent complete rinsing. Repeat the chlorine treatment as needed. After the moss is dead, it will loosen with time until it can be blown off the roof with any other roof debris. Take proper precautions to protect landscaping and surrounding areas from the chlorine bleach solution. Use the appropriate personal protective equipment (PPE) when working with chlorine bleach.
• We do not recommend the use of commercially available cleaning solutions or concentrates, regardless of whether they purport suitability for use on roofs, as our experience has shown that many of these products may damage our shingles or the overall integrity of the roof system. The only cleaning method we do recommend is
the bleach/water solution used in the manner outlined above.
• Avoid other cleaning practices, as they may damage the shingles and void coverage under the terms of the PABCO® Limited Shingle Warranty. This includes, but is not limited to, the use of acids, detergent powders, solvents, and any other material that does not rinse cleanly off the roof. Do not clean roofs with a power
washer, or any other pressurized water device, with or without chemicals, or use abrasive cleaning methods such as a brush or broom.
• The roof surface must be protected from over spray or staining from other trades, such as painting, stucco, or masonry, as there may be no way to remove these foreign materials without damaging the shingles.
• Do not apply paints or coatings to the shingles.
• Periodically inspect the roof for damage and debris, typically each spring or after extreme weather. Repair roof damage promptly to avoid further damage.
• Safety must be the first priority when working on a roof. Observe every necessary precaution, safety guideline, and safe work practice, or have a roofing professional do the work.

This information on Remove Pine Needles From Roofs was take from this bulletin.

Remove pine needles from roofs as often as needed. This could be 4 or 5 times a year.  Safety is the most important thing as being on a roof is a dangerous thing. Most falls are from ladders and these occur when getting on or off the roof. When you go to remove pine needles from roofs, learn the safest way to do the job first.



How Often Should Gutters Be Cleaned

How often should gutters be cleaned?

It depends! Some houses can go for a couple of years between cleanings. Others need cleaning twice a year or more. Each situation is different

Develop a history

Starting out to find how often cleaning is needed the gutters and down spouts should be checked twice a year for signs of blockage, leaks and possible overflowing. If you live in a high rainfall area or have a lot of trees hanging over the house you may want to increase the frequency of checking the gutter system. As you check the system and track the need for cleaning after a season or two it will be very clear what is needed for gutter cleaning frequency

how often should gutters be cleaned

For those who can not see any of the gutters from inside the house and do not climb ladders checking the system for blockage can be relatively easy. On clear days check of signs of mold or streaking on places the gutters may over flow. Observe the siding for discolorations indicating water leaks. Just when it starts to rain go to the out let of he downspouts and if water does not flow very soon after the start of a heavy rain you know that something is blocking either the gutters or leaders. If you want to stay dry and the garden hose spray can reach the roof the same test can be done of the system by spraying water on the roof and simulating a rain, checking the water flows down the system as it saturates the roof and fills the gutter.

This way you do not have to clean the gutters more often than needed. Regardless if you are doing it yourself or paying some one to climb up and clean the gutters no one wants to waste time energy or money on something that is not needed.

Cleaning frequency

Prior to having a history on when gutter cleaning is need for a house follow this rule of thumb. Gutters and downspouts should be cleaned and checked for signs of necessary repairs at least twice a year. Typically, the best times to do this are spring when the tree seed pods and flower debris are down and fall when the leaves are down but take care not to wait so long a prolonged freeze sets in. Each year this window of opportunity can be very different. The late fall option can be difficult if put off too long and you get into snow and freezing weather were it is not safe or practical to work on gutters. If you suspect a problem or live in an extremely rainy climate, then perhaps, you should check and clean the gutters more frequently. If there are a lot of trees that are high or over hang the roof then the need for cleaning will naturally increase the frequency. Some people cannot tell in advance the need for gutter cleaning so just wait till the gutters show a problem then have them cleaned. This method can stretch out the need for cleaning but also lead to a sudden death playoff with problems in the winter being the hardest to resolve if there are freezing conditions. If you live in an area that winter is cold enough for freezing then you can get ice dams in the gutters and water pouring into the house as melting snow from the heat inside works up under the roof since the ice blocks the normal flow of water off the roof. As you keep track of how much material is removed at cleaning, how full the gutters are and if there are blocked downspouts you will know what the right frequency is. Most houses always have bad spot and areas of guttering that stays clear.

“How Often Gutters Should Be Cleaned”

Was written By Dana Huntley of Gutter Cleaning Hampton

http://guttercleaninghampton.com



How To Quiet Noisy Gutters

How to Quiet Noisy Gutters

Noisy gutters can drive you insane and you will be asking yourself “do I really need gutters on my home”? A house does not look right with out having rain gutters on it and they serve a purpose to your home. A well maintained roof will keep water out of your home, but if there are no gutters and downspouts on your home the water running off your roof will enter your home thru the basement. So, the answer is yes. You do need gutters on your home. How to quiet noisy gutters is the question you need answered.

If your have noisy gutters from water overflowing, you will need to do a few things to the gutters on a regular basis. If you have had a storm and branches or leaves get into the gutters then, when the rain gathers in the gutters, it will not flow properly out of your seamless gutters. This will cause either a waterfall over the gutters. If you do not want to take the time out to clean out the gutters on a regular basis you will want to place a rain gutter covering over it. This will catch all the leaves and branches and stop them from getting into the gutter itself.

Leaking joints is another reason for dripping gutters. Although this may not cause any noise, it will depend on what is underneath the drip. This may not make your list of how to quiet noisy gutters, but it still will need to be fixed. A small leak over time can cause extensive damage to your home.

How to quiet noisy gutters

Not only would you need to keep the gutter cleaned out but if you want to solve the annoying dripping problem that creates noisy gutters that can last long after it stops raining, you can do a couple of different things to help this. You can place decorative down spout chains on the down spout to give the rain a place to flow instead of the rain water falling for several feet, then hitting the down spout elbow and making the annoying noise. You can also put an insert in the elbow that will quiet noisy gutters.

When you have a noisy gutter you will want to fix the problem quickly because that noise can drive you bananas especially if those noisy gutters are outside your bedroom. Even though gutters are extremely important pieces to the structure of the house, they do not have to be annoying or hard to live with. You can have quiet gutters if you just take the time to install the inserts into your downspouts elbows or put up a decorative down spout chain. This is how to quiet noisy gutters.



Gutters and Downspouts

Gutters and Downspouts A Look of Distinction

A house is not a house without gutters and downspouts. The roof of a structure can be rendered useless without gutters and downspouts. They are what I call the indispensables given their importance. Going beyond its fundamental function, a house cannot aesthetically be acceptable without gutters and downspouts. It just doesn’t feel right if you ask me. I don’t think builders and architects will ever push through a project without these two in the plan. It is downright silly and utterly wrong.

In the same way, I am pretty sure architects are using these two to accentuate the color scheme of the house that they are designing. In fact, I believe most homeowners are trying different ways to highlight their gutters and downspouts. The reason for this is that it gives them a certain taste of distinction. It differentiates and highlights the features of their house. The angles are the most common head turners. It creates a powerful impression of the size and architectural design that is present in the building.

Looking at modern architectural concepts, some downspouts are shaped in line with the shape of the house. Some are even in tune with the color scheme, design concept and roofing structure. Others, well they just like to make it stand out. Gutters and downspouts usually create a powerful illusion that makes the roof discontinuous with the walls. Attractive roofing will not stand out as you need these two together to complement its design.

Given this scenario, the function of the gutters and downspouts now goes beyond collecting water. If it is not properly maintained, the image of the house can be severely damaged. It can destroy interior and exterior walls, ceiling and even the roof. If the downpour is heavy, floor tiles can also be critically damaged. If the gutters and downspouts are clogged, water will flow down like a river from the roof leaving water marks in the painted wall. This is why they cannot and should never malfunction. The danger it creates is just the starting point. If these remained unfixed, the house will look dilapidated and old. Total renovation will be required if this happens. Sometimes even a reconstruction is inevitable. In fact, a lot of houses nowadays just leave leaking gutters and detached downspouts. This should never be the case. These structures should always be fixed and given its due attention. Cost must be secondary at this point given that the ambiance, the feel and the value of the house is directly related to these two.

gutters and downspouts

How can the house be considered a prime estate if the most noticeable part is destroyed? I don’t think anyone will invest on a property that has a leaking roof or with flowing water similar to Niagara Falls. Point of the matter still remains; never miss out on the most distinguishing part of the house, the gutters and downspouts. It is important to constantly look for ways on how maintain these integral parts. It is also very critical to note that gutters and downspout gives a certain flavor to the house. It separates the average from the great ones.



6″ Rain Gutters

What You Need to Know About 6″ Rain Gutters

The roof is among the most important, but frequently neglected parts of the house. It has the significant component and that’s the 5″ or  6″ rain gutters, which performs different functions, from protecting the house basement to the topsoil and other parts where damages due to the rain are possible. 

Rain gutters are mainly composed of 2 main parts – the gutter and the downspout. There are also 2 kinds of rain gutters – seamless and sectional. The latter is pop riveted together if it is aluminum. If the rain gutters are galvanized or copper they can be pop riveted or soldered together. The seamless type features seams for the downspouts and corners. As the seamless type lasts longer and is leak proof, it’s preferred by many people these days.  Soldered copper rain gutters will last the longest, but the cost keeps it from being the preferred material. A professional contractor is needed to manufacture the 6” seamless gutter on site.

What is the purpose of 6″ rain gutters?

As its name suggests, a rain gutter is a trough situated at the bottom edge of the roof to gather and control rain water run-off. This way, the foundation of the house is protected from becoming flooded by water. Rain gutters come in various shapes, types and sizes. These include half-round or U shapes and K configurations.

6" rain gutters

Many residential rain gutters are available in 2 sizes – 5” and 6” and are made of galvanized steel, copper or aluminum. The usual 5” K-style rain gutters come with 2” by 3” downspouts. 6” rain gutters, on the other hand, use a 3” by 4” downspout.

One foot of a 5” inch K-style rain gutter can hold 1.2 gallons of water. For the 6” rain gutters, it can hold 2.0 gallons of water. Seamless aluminum is the most common residential gutter type. Initially only offered in silver, early aluminum rain gutters were painted white and ultimately painted in different colors to match the roof, trim and house siding, making rain gutters not just useful, but also a design feature. 

Shopping For 6″ Rain Gutters    

The most common materials are copper, aluminum, and galvanized steel. Determine which material suits your home. Steel is more affordable than copper, but it’s not as durable. Copper can be expensive and is used for certain types of houses, it is the most attractive. But regardless of the material you choose, make sure to pick the thickest material that you can afford. Keep in mind that the thicker the gutter material, the more durable and stronger it will be.

6" rain gutters

When shopping for rain gutters, the size is always an important consideration. Gutters are usually available in 5″ and 6″ sizes. 6″ rain gutters are best for those people with larger roofs as they can hold more water. If you live in an area that experiences a lot of rainstorms, you may consider using 6″ rain gutters.

Another consideration is the type of rain gutter you will get. The most popular type is the K-style, but you can also go for square-shape and half-round ones.  Your choice will depend on your home’s design. Copper gutters are left in their natural state. The patina over the years will give your home a look of distinction. If using aluminum or galvanized you will need to pick a color.  You may pick a color to match the current color of the roof. The most common choice is to match the color of the trim of your home. Another choice can be to pick an accent color that is different then the trim of your home.  

The Purpose Of 6″ Rain Gutters

You 6″ rain gutters will serve 2 purposes. First to protect your home from the damage that can be caused by water. Second rain gutters will give your home a look of class. Pick a color and size that will make you proud of your home.



Damage Done By Clogged Gutters

 Damage Done By Clogged Gutters

Have you ever been to Niagara Falls? Looks magnificent isn’t it? What if you come home one rainy day and see this site in your own house? How will it make you feel? I am pretty sure you will freak out and would want to leave that very day. This is the damage done by clogged gutters.

This is just one of the damage done from clogged gutters. As the years progress, houses will definitely be nagged by clogged gutters. It’s inevitable given the seasons that they encounter and the leaves that fall off the trees. It is part of aging and without the right maintenance; it can wreak havoc to our homes.

Here is the damage done by clogged gutters

Yes, clogged gutters are a pain. It has numerous effects. The first one is overflowing water. When the weather pours down in a torrential rain, it will reach a tipping point where it will look for ways to get out. It can seep through your walls, ceiling and can eventually flood the basement. Water is the source of life but in excess amounts can destroy life as we know it. It also leaves a powerful stain. Once it flows, it leaves a mark. Clogged gutters can also be heavy enough to pull down the gutter itself. Imagine the impact of an aluminum structure falling down on your head. It can also bring down part of the roof itself. If the damage done by clogged gutters is not addressed the roofing structure and fascia can come down with it.

damage done by clogged gutters

Second is the damage done by clogged gutters leaving stagnant water behind. The most damage is when it is hidden in the walls and attic. The insulation or wood gets wet and stays wet for extended periods of time. These areas do not have the sun and outside air to dry them. Outside if these are not properly drained it can become a breeding ground for disease carrying insects and parasites. Mosquitoes, mice and cockroaches will have a field day. They will now have a special place to stay and multiply. These creatures can make people seriously sick. Imagine if you have a baby in the house. Do you want your son or daughter to suffer because you failed to maintain the cleanliness of the gutter? If these things don’t get to you, bacteria and viruses will. Remember moisture and a damp place is the ideal environment these microorganisms thrive on. They can bring diseases to your house.

Third is the aesthetical part. Imagine a dilapidated structure with falling gutters and cracked downspouts. It is like a bunker in a zombie movie. It makes the house look old and dirty. Going home every single day will be a challenge. Seeing your home look the way it is will be very depressing. The gutters accentuate the neatness and beauty of your house. But it can also highlight the ugliness of an ill maintained structure.

Bottom line, gutters play a significant role. The damage done by clogged gutters can cause both physical harm and ruin your property. As the saying goes, an ounce of prevention is better than a pound of cure. Gutters need to be maintained regularly. If you want a nice place to live, ensure that you are diligent enough to clean your gutters.


%d bloggers like this: